Table of Contents
Advertisement
Available languages
Available languages
one another and facilitates troubleshooting. The
point where these cables converge will usually be in
the room where the HomeMatic central control unit
is installed.
6
Installation
The device features flexible connecting cables
(0.5 mm
) with ferrules for contact inputs S1 to S7.
2
Remove the rubber caps from the ferrules prior to
connection; the cables can then be connected to
the appropriate switch contacts directly, as per the
diagram on page 28.
If you are not using all the channels, leave
the rubber caps on the ferrules of those that
remain unused.
Screw terminals are provided for connecting switch
contacts to inputs S8 to S12. Here, rigid cables or
flexible cables with ferrules (max. 0.75 mm
connected.
26
) can be
2
Advertisement
Chapters
Table of Contents
