Getting Started; Setting Up - Panasonic KX-TGF870 Series Operating Instructions Manual

Setting up

Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.
Connect the telephone line cord to the
single-line telephone jack (RJ11C) until you
hear a click.
A DSL/ADSL filter (not supplied) is required if
you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226.
4
5
6
3
1
R Follow the directions on the display to set up
the unit.
For assistance, visit www.panasonic.ca/english/support
TGF87xC_(en)_0204_ver031.pdf 9
7
7
3
3
1 2
n Charger
Connect the AC adaptor to the power outlet.
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
(R03) size ( ).
1
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
1
4
2
R Follow the directions on the display to set up
the unit.

Getting Started

1
, ).
3
1
9
2020/02/04 9:33:42