Getting Started; Setting Up - Panasonic KX-TGW420 Operating Instructions Manual

Getting Started

Setting up

Connecting the AC adaptor/corded
handset
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the AC adaptor to the power outlet.
Fasten the AC adaptor cord by hooking it.
Connect the corded handset cord to the
corded handset and the base unit until you
hear a click.
Note:
R Use only the supplied AC adaptor
KSAS0050750080VUD.
1
2
1
Connecting the telephone line cord
Refer to one of the following methods depending
on your situation:
– To connect to four single-line telephone jacks:
page 8
– To connect to two 2-line telephone jacks:
page 8
Connect the telephone line cord until it clicks into
the base unit and telephone line jack.
8 For assistance, please visit http://shop.panasonic.com/support
TGW420_(en)_OI_1226_ver06.pdf 8
To connect to four single-line telephone jacks
Connect the 4-wire telephone line cords to
each ports.
Connect the single-line telephone jacks
(RJ11C) until you hear a click.
2
2
2
2
To connect to two 2-line telephone jacks
Connect the 4-wire telephone line cords to
LINE1/2 and LINE 3/4 port.
Connect the 2-line telephone jacks (RJ14C)
4 until you hear a click.
4
3
2
2
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact your DSL/
ADSL provider) to the telephone line between the
base unit and each telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function properly.
1 1 1 1
1 1
2019/12/26 13:15:31