Yolink YS6602-UC User Manual page 16

Pairing
Find a YoLink Plug as controller(Master). Hold the power button for 5-10 seconds,
the light will flash green quickly.
Find another action device as responder(Receiver). Hold the set button for 5-10 seconds,
the device will enter pairing mode.
After pairing succeed, the light will stop flashing.
When the YoLink Plug turns on, the responder will turn on as well. When the YoLink Plug
turns off, the responder will turn off as well.
Unpairing
Find a controller(Master) YoLink Plug. Hold
the power button for 10-15 seconds, the light
will flash red quickly.
F i n d a r e s p o n d e r (
H o l d t h e s e t b u t t o n f o r 1 0 - 1 5 s e c o n d s , t h e
d e v i c e w i l l e n t e r u n - p a i r i n g m o d e .
The above two devices will unpair by themselves
and the light stops flashing.
After unbundling, When the YoLink Plug turns
on, the responder will no longer turn on. When
the YoLink Plug turns off, the responder will no
longer turn off.
R e c e i v e r ) a c t i o n d e v i c e .
POWER BUTTON
14