Freezing The Image (Freeze); Setting The Password - Toshiba TLP-X100U Owner's Manual

Using handy features (Continued)

Freezing the image (Freeze)


The projected image can be frozen. This function is to be used to pause
a video during a presentation, etc.
Press the remote control's FREEZE button.
The picture pauses. (The Freeze function is released by pressing
the FREEZE button again.)
Notes
• The icon will appear while freeze is in effect.
• Other operations will also release the freeze.
• Even if an image is frozen on the projector, the pictures are running
on the video or other equipment.
• If you use this function on commercial video software, broadcast
or cable-broadcasting except for the purpose of your private
viewing and listening, it may infringe the copyright protected by the
copyright laws.

Setting the password


How to change password
The default password is 000000.
Select [Password] in the Default setting 2 menu and press the
1
button.
2 Select [Password registration] in the password registration, setting
menu, and press the button.
The password entry screen is displayed.
Enter the current password (6-digit number) using numeric keys of the
3
remote control.
• Enter [000000] (6 zeros) for the first change.
• The password is not displayed. Instead it appears as [******].
Enter a new password (6-digit number).
4
5 Re-enter the same password for confirmation.
Note
• Please do not forget your password. If you forget the password, you can not
release the password by yourself.
In such a case, please inquire your dealer.
Remote
control

How to set password (from [Off] to [On])
Select [Password] in the Default setting 2 menu and press the
1
button.
Select [Password setting] next, and press the
2
3 Select [On].
4 Select [OK] and press the
The password entry screen is displayed.
5 Enter the password using numeric keys of the remote control.
The password setting will be set as [On].
6
How to operate when password is [On]
Turn on the power.
1
2 The lamp lights and the password entry screen appears.
3 Enter the password using numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projector
goes into normal operation. If the password is wrong, a message appears to prompt
you to re-enter the password, and again the password entry screen is displayed. If
or
you enter a wrong password for more than 5 times, the projector will automatically
power off and enter standby mode.
Note
• When the password setting is [On], the password function will be enabled only
when the projector is restarted after the power cord has been unplugged.
The password that you set will not be enabled when restarting from standby mode
without unplugging the power cord.
How to set password (from [On] to [Off])
Select [Password] in the Default setting 2 menu and press the
1
button.
The password entry screen is displayed.
Enter the password using numeric keys of the remote control.
2
Select [Password setting] next, and press the
3
4 Select [OFF].
Select [OK] and press the
5
or
or button.
button.
or
or button.
button.