Table of Contents
Advertisement
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide
Step 7 Select Disabled and press Enter.
Step 8 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 9 Select Yes and press Enter to save the settings.
The server automatically restarts for the settings to take effect.
----End
10.6 Accessing the BIOS
10.6.1 Accessing the BIOS (V3XX or Earlier)
Procedure
Step 1 Log in to the desktop of the server node.
For details, see
Step 2 On the Remote Virtual Console, click
Step 3 Choose Forced System Reset or Forced Power Cycle.
The Select an Option dialog box is displayed.
● A forced restart or power cycle may cause data loss or program damage.
● Before performing a forced restart or power cycle, ensure that no service
Step 4 Click Yes.
The server node starts to be forcibly restarted or power cycled.
Step 5 During the restart, press Delete or F4 when the information shown in
10-35
Issue 17 (2021-03-09)
10.3 Logging In to the Desktop of a
NO TICE
interruption risk exists.
is displayed.
Copyright © Huawei Technologies Co., Ltd.
10 Common Operations
Server.
on the menu bar.
Figure
144
Advertisement
Table of Contents
