Connecting To A Tv; Connecting To A Tv (Using The Component Video Jacks) - Toshiba SDK1000K Owner's Manual

Connecting to a TV

Connect the DVD player to your TV.
Connecting to a TV
Normal TV
T o audio T o video
input input
(yellow)
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making
any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied)
and then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.

Connecting to a TV (Using the component video jacks)

Interlaced outputs (ColorStream
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality picture
playback.
Actual labels for component video inputs may vary depending on the
TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
In some TVs or monitors, the color levels of the playback picture may
be reduced slightly or the tint may change. In such a case, adjust the
TV or monitor for optimum performance.
To Y video
input
To P video
B
input
To P video
R
input
T o audio input
HDMI OUT
T o VIDEO
OUT
(yellow)
Audio/Video cables (supplied)
® ) Progressive outputs (ColorStream Pro
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video signal.
Connecting to these inputs allows you to view the highest quality
pictures with less fl icker.
Consumers should note that not all high defi nition television sets
, C )
B R
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the "standard defi nition" output. If there are questions regarding our
TV set compatibility with this model 480p DVD player, please contact
our Customer Service Center.
To 2ch AUDIO OUT
(R: red, L:white)
Audio cable (not supplied)
Component video cable (not supplied)
VIDEO Y P B P R
VIDEO OUT
AUDIO
OUT R L
ANALOG COAXIAL DIGITAL
T o 2ch AUDIO OUT
(R: red, L:white)
• Make the following setting.
On-screen display
"Digital out"
"Video"
VIDEO Y P P
B R
VIDEO OUT
AUDIO
OUT R ANALOG L COAXIAL DIGITAL
HDMI OUT
Page
Select:
"Off",
"PCM" or
22
"Raw"
Component
22
P-Scan
HDMI
® )
13