Caution; Connections; Connecting To A Tv - Toshiba sd-4800 Owner's Manual

Hide thumbs Also See for sd-4800:

Owner's manual (70 pages)

Supplemental service manual (10 pages)

Service manual (176 pages)

Table Of Contents

Table of Contents

Basic playback

Others

Connections

LIMITED W

Connections

Locating a Desired Section

Playing an MP3 Encoded CD

Operating a TV with the Remote

Connecting to a TV

Connecting to Optional Equipment (Continued)

Connecting to Optional Equipment

Playing a Disc

Variable Speed Playback

Before Calling Service Personnel

Toshiba America Consumer Products, Inc. ("TACP"), Toshiba Hawaii ("THI") and Toshiba Canada Limited ("TCL") make the

Connectin

You can play MP3 files on this DVD player.

Check the following guide for the possible cause of a problem before contacting service.

Connect the DVD player to your TV.

You can play discs at various speeds, and resume playback from the location

You can enjoy high quality dynamic sounds by connecting the DVD player to

This section shows you the basics on how to play a disc.

Control

following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift

where you stopped playback.

optional audio equipment.

from the original purchaser and to no other purchaser or transferee.

For details of output sound, see

You can operate the basic functions of selected TVs

using the supplied remote control.

Limited Ninety (90) Day Warranty

Symptoms and correction

TACP/THI warrant this product against defects in materials

or workmanship for a period of ninety (90) days after the

Digital Theater

• For connection to your TV, see "Connecting to a TV"

date of original retail purchase. During this period, TACP/

Symptom

THI will repair or replace a defective product or part, at their

18 19

Connecting to a TV

option, with a new or refurbished product or part without

No power.

• For details of output sound, see

Normally, DVD video discs are divided into titles, and the titles are sub-divided into chapters. DVD audio discs are divided into

charge to you. You must deliver the entire product to a

• This section uses the following reference marks.

DVD-V

DVD-A

Playing an MP3 encoded CD

Basic playback

Playing in fast reverse or fast forward directions

Operating a TV with the remote control

TACP/THI Authorized Service Station. You are responsible

groups, and the groups are sub-divided into tracks. VIDEO CDs and audio CDs are divided into tracks. You can quickly locate

The DVD player turned off by

VCD

DTS is a high quality surround technology used in theaters and now available for

for all transportation and insurance charges for the unit to

itself.

any specific title, chapter, group, or track.

and from the Authorized Service Station. If you live in the

home use, on DVD video discs or audio CDs.

VIDEO OUT

No picture.

Preparations

MP3 disc compatibility with this player is limited as follows:

: Front speaker

Preparation

U.S.A. you may, at your option, return your DVD Unit to:

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1

VIDEO

Press REV or FWD during playback.

• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.

• Playable discs: CD-ROM, CD-R (650MB / 74 min. only)

Follow the instruction of "To program the remote control" to set the brand code.

Toshiba America Consumer Products Inc.

channel DTS encoded sound tracks on DVD video discs or audio CDs.

• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected

CD-RW is not recommendable.

: Rear speaker

Title 1

REV

SELECT

FWD

Returns Center

to the DVD player.

• Sampling Frequency: 44.1 kHz only

Chapter 1

Chapter 2

1420C Toshiba Dr.

• Bit rate 32 kbps-320 kbps

: Sub woofer

Point the remote control at your TV, and

Lebanon, TN 37087

No sound.

• CD physical format: Mode 1, Mode 2 XA Form 1

use buttons as follows.

Upon receipt we will, at our option, exchange the DVD Unit

Press the power button (ON/STANDBY).

To S VIDEO OUT

• File system: ISO9660 Level 1

: Center speaker

with a new or refurbished unit. Canadian consumers are

• File names are limited to eight characters or less and

ON/STANDBY

requested to contact TCL. In Hawaii consumers are

TV power

must incorporate "MP3" extension.

: Signal flow

requested to contact THI.

TV/VIDEO

e.g."********.MP3"

VIDEO CD/Audio CD

VOL + / –

• File names cannot contain special characters such as

Limited One (1) Year Warranty

SELECT

Track 1

Track 2

"?!><+*}{`[@]:;\ /.," etc.

TACP/THI further warrant the parts in this product against

• Total number of files on the disc should not exceed 254.

defects in materials or workmanship for a period of one (1)

When the DVD player is turned on for

Notes

year after the date of original retail purchase. During this

TV/VIDEO

the first time, an on-screen display will appear

The playback picture has

• DO NOT connect the BITSTREAM/PCM (DIGITAL)

Preparations

period, TACP/THI will repair or replace a defective product

Set to "I."

TV power

occasional distortion.

to provide initial settings. Press the

AUDIO OUT jack of the DVD player to the AC-3 RF input

or part, at their option, with a new or refurbished product or

• When you playback an MP3 encoded CD, set "Priority

VOL

buttons to select an item, and press the

of a Dolby Digital Receiver. This input on your A/V

part without charge to you, except that if a defective part is

Contents 2" to " MP3

ENTER button. See the pages in

Receiver is reserved for Laserdisc use only and is

replaced after ninety (90) days from the date of the original

make a selection using the

incompatible with the BITSTREAM/PCM (DIGITAL)

Brightness is unstable or

retail purchase you pay labor charges involved in the

noises are present in the

press the ENTER button.

AUDIO OUT jack of the DVD player.

replacement. You must also deliver the entire product to a

Place a CD that contains MP3 files on

playback pictures.

• Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT

DVD-V

DVD-A

DVD-V

DVD-A

TACP/THI Authorized Service Station. You are responsible

On-Screen Language

Locating a title using the top menu

Playing frame by frame

the disc tray.

The DVD player does not

jack of the DVD player to the "DIGITAL (OPTICAL)" or

VCD

for all transportation and insurance charges for the unit to

VCD

Connecting to an amplifier equipped with an MPEG2 audio decoder

TV Shape

start playback.

"DIGITAL (COAXIAL)" input of a Receiver or Processor.

and from the Authorized Service Station. If you live in the

After making all the settings, select "

• Refer to the owner's manual of the connected equipment

U.S.A. you may, at your option, return your DVD Unit to:

Press TOP MENU.

Press PAUSE/STEP during still playback.

as well.

press the ENTER button.

Toshiba America Consumer Products Inc.

MPEG2 sound

• When you connect the DVD player to other equipment, be

Press OPEN/CLOSE to load the disc.

Returns Center

PAUSE/STEP

You can enjoy motion picture and live concert DVD video discs with dynamic

sure to turn off the power and unplug all of the equipment

1420C Toshiba Dr.

Press OPEN/CLOSE.

realistic sound by connecting an amplifier equipped with an MPEG2 audio

from the wall outlet before making any connections.

Lebanon, TN 37087

OPEN/CLOSE

decoder or MPEG2 audio processor.

OPEN/CLOSE

• The output sound of the DVD player has a wide dynamic

Upon receipt we will, at our option, exchange the DVD Unit

range. Be sure to adjust the receiver's volume to a

with a new or refurbished unit. Canadian Consumers are

moderate listening level. Otherwise, the speakers may be

requested to contact TCL. In Hawaii consumers are

damaged by a sudden high volume sound.

requested to contact THI.

Playback does not follow the

• Turn off the amplifier before you connect or disconnect the

Place a disc on the disc tray.

course of the disc's program.

DVD player's power cord. If you leave the amplifier power

To stop playback, press STOP.

Rental Units

Buttons do not work.

on, the speakers may be damaged.

The warranty for rental units begin with the first rental or

STOP

thirty (30) days from the date of shipment to the rental firm,

whichever comes first.

Press

want.

The remote control does not

work properly.

ENTER

Notes

• There are two different disc sizes. Place the disc in

• Refer to the owner's manual of the connected TV as well.

the correct guide on the disc tray. If the disc is out

• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before

of the guide, it may damage the disc and cause the

making any connections.

DVD player to malfunction.

• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not

• Do not place a disc which is unplayable in this

supplied) and then connect to your TV.

DVD player.

• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector,

the playback picture may be distorted as DVD video discs are copy protected.

Downloaded From DvDPlayer-Manual.com Toshiba Manuals

Cause

• The power plug is disconnected.

• The automatic power off function turned

the unit off.

AUDIO OUT

ANALOG

• The TV is not set to receive DVD signal

5.1CH

SURROUND

output.

BITSTREAM

DVD video disc

/PCM

SUB

Title 2

REV : Fast reverse playback

• The video cable is not connected securely.

Chapter 1

Chapter 2

Chapter 3

FWD: Fast forward playback

COAXIAL OPTICAL

2CH

DIGITAL

Amplifier equipped with

• The equipment connected with the audio

Each time you press the REV or

a DTS decoder

(red)

cable is not set to receive DVD signal

(white)

FWD button, the playback speed

output.

The DVD player turns on and the

To OPTICAL

To COAXIAL

changes.

• The audio cable is not connected securely.

To turn the power on and off.

ON/STANDBY indicator on the

type digital

To 2CH

To VIDEO OUT

To select a video input.

audio input

player illuminates.

AUDIO

• The audio receiver or TV is turned off.

To adjust the volume.

OUT

Track 4

To select a channel.

Track 3

Track 5

• The setting of output sound format is

incorrect.

• The disc is dirty.

• It is in fast forward or fast reverse

playback.

JPG ".

Audio/video cable

buttons, then

• The effect of copy protection.

(supplied)

S video cable

• No disc is inserted.

(not supplied)

• An unplayable disc is inserted.

If the TV has an S video input, connect the

• The disc is placed upside down.

DVD player with an S video cable. When

The top menu appears on the TV

Each time you press the PAUSE/

using an S video cable, do not connect the

screen.

• The disc is not placed within the guide.

STEP button, the picture advances

yellow video cable.

one frame.

Playback starts.

e.g.

The disc tray opens.

• The disc is dirty.

TITLE 1

TITLE 2

• The parental lock function is set.

To start playback from stop mode,

press the PLAY button.

Amplifier equipped with an

TITLE 3

TITLE 4

• It is in the mode of repeat playback,

MPEG2 audio decoder

memory playback, etc.

• Power supply fluctuations or other

To OPTICAL

To COAXIAL

abnormalities such as static electricity may

type digital

With the playback

audio input

interrupt correct operations.

audio input

side down.

to select the title you

If the titles in the top menu are

assigned a number, you can directly

• The remote control is not pointed at the

remote sensor of the DVD player.

locate a specific title by pressing its

designated number with the number

• The remote control is too far from the DVD

player.

buttons.

• The batteries in the remote control are

exhausted.

CAUTION

Keep your fingers well clear of the disc tray as it is closing.

Neglecting to do so may cause serious personal injury.

ON/STANDBY

indicator

Commercial Units

Products sold and used for commercial use have a limited

ninety (90) day warranty for all parts and labor.

Warning

Owner's Manual

• When you are connecting (via the BITSTREAM/PCM

You should read the owner's manual thoroughly before

(DIGITAL) AUDIO OUT jack) an AV decoder that does

operating this product. You should complete and mail the

not have Dolby Digital or MPEG2 decoding function, be

enclosed Demographic card within ten (10) days after you,

sure to set "Digital Output" to "PCM" from the on-screen

or the person who has given you this product as a gift,

displays

purchased this product. This is one way to enable TACP to

To resume normal playback

To pause playback

damage your hearing as well as the speakers.

provide you with better customer service and improved

Press PLAY.

Press PAUSE/STEP during playback.

• DO NOT play DTS-encoded discs when you are

products. Failure to return the card will not affect your rights

Group 1

connecting an AV decoder that does not have DTS

under this warranty.

PLAY

PAUSE/STEP

decoding function.

To program the remote control

Track 1

Track 2

• When playing DTS-encoded discs (audio CDs),

Your Responsibility

AUDIO OUT

VIDEO OUT

1 While holding down ENTER, press the number

VIDEO

excessive noise may be output from the analog audio

The above warranties are subject to the following

Press OPEN/CLOSE to close the disc

(yellow)

buttons that correspond to your TV's brand code

SUB

SELECT

output jacks. To avoid possible damage to the audio

conditions:

COAXIAL OPTICAL

2CH

referring to the list on the next page.

tray.

system, you should take proper precautions when the

Notes

Selecting a track (file) in the disc

(1) You must retain your bill of sale or provide other proof of

Connect either.

analog audio output jacks of the DVD player are

• The DVD player mutes sound and omits subtitles during

purchase.

1 If a track list is not displayed, press the MENU button

e.g. To Program brand code 0071.

connected to an amplification system. To enjoy DTS

OPEN/CLOSE

reverse and forward scan of DVD video discs.

(2) You must notify a TACP/THI/TCL /Authorized Service

to show it.

75 W coaxial cable

Digital Surround™ playback, an external 5.1 channel

• DVD audio discs may not be played in fast reverse or fast

Station within thirty (30) days after you discover a

The current track being played is highlighted in red.

Optical digital cable

DTS Digital Surround™ decoder system must be

forward directions.

defective product or part.

2 Press the

ENTER

connected to the BITSTREAM/PCM (DIGITAL) AUDIO

• The playback speed may differ depending on the disc.

DVD-V

If you insert a DVD video disc that contains a top

(3) All warranty servicing of this product must be made by a

want to play.

OUT jack of the DVD player.

TACP/THI/TCL Authorized Service Station.

menu, a menu may appear. See "Locating a title

The selected track is highlighted in green.

(4) U.S.A. warranties are effective only if the product is

using the top menu."

3 Press the ENTER button to begin playback of the

Hold down.

purchased and operated in the Continental U.S.A. or

You may need to press the TOP MENU or MENU

selected track.

Puerto Rico.

button to display disc menu (depending on the

, and

2 Release ENTER.

(5) Labor service charges for set installation. Set up,

actual DVD video disc.)

The DVD remote control memorizes the selected

adjustment of customer controls and installation or

A menu may appear depending on the disc.

DVD-A

Notes

brand code.

repair of antenna systems are not covered by this

See "Locating a title using the top menu"

• Some discs may not permit this operation.

warranty. Reception problems caused by inadequate

• If you stop playback by pressing the STOP button, and then

antenna systems are your responsibility.

press the PLAY button, playback will start from the beginning

(6) Warranties extend only to defects in materials or

Notes

Note

" and

of the track.

To resume normal playback

workmanship as limited above and do not extend to any

• The remote control is programmed at the factory to operate

Press ENTER.

If the disc tray contains a disc you have already played,

• The SKIP

product or parts which have been lost or discarded by

TOSHIBA TVs.

Press PLAY.

playback will begin from the location where you last stopped

are also available.

you or to damage to products or parts caused by

• A single brand may use different codes depending on the

playback.

PLAY

misuse, accident, damage caused by Acts of God, such

particular model. Enter the correct number referring to the

ENTER

as lighting or fluctuations in electric power, improper

brand code table.

To start playback in the stop mode

This DVD player requires discs/recordings to meet

installation, improper maintenance or use in violation of

• For some brands, several brand codes are provided. Try

Press PLAY.

certain technical standards in order to achieve optimal

instructions furnished by us; or to units which have

each of them until the remote control operates your TV.

Notes

playback quality. Pre-recorded DVDs are automatically

been altered or modified without authorization of TACP/

• Some TVs may not respond to all of the functions in the

• The sound is muted during frame by frame playback.

Notes

set to these standards. There are many different types

AUDIO OUT

THI/TCL or to damage to products or part thereof which

table above, or may not be operated at all with this remote

VIDEO OUT

• When using a DVD audio disc that includes pictures, this

• The instructions above describe basic procedures which

VIDEO

of recordable disc formats (including CD-R containing

have had the serial number removed, altered, defaced

control. In this case, operate that TV with its own remote

SUB

operation may be permitted in some picture segments.

SELECT

may vary depending on the contents of the DVD video disc.

MP3 files). Given the fact that technology in this area is

or rendered illegible.

control.

2CH

If different instructions appear on the TV screen, follow those

(7) Should you elect to return your DVD Unit to TACP after

still maturing, Toshiba cannot guarantee that all genre of

• If you replace the remote control's batteries, remember to

Connect either.

instructions.

recordable discs will produce optimal playback quality.

the ninety (90) days and within one (1) year, or after the

reprogram the brand codes for TV.

• If you display the top menu during playback and press the

The technical criteria set out in this owner's manual are

warranty period has expired: Call (800)-631-3811 to

75 W coaxial cable

TOP MENU button again without selecting any title, the DVD

meant as a guide only.

receive information concerning an exchange price.

Optical digital cable

player may resume playback from the point where you first

Payment must be enclosed with product in the form of a

pressed the TOP MENU button (depending on the actual

Customers should also note that permission is required

certified check or money order including reason for

DVD video disc.)

in order to download MP3 files and music from the

return.

When using a DVD audio disc, the DVD player resumes

internet. Toshiba has no right to grant such permission.

(8) Physically damaged DVD Units are not acceptable for

playback from the beginning of the track where you pressed

Permission should always be sought from the copyright

repair or exchange whether in or out of warranty and

the TOP MENU button.

owner.

will be returned as received.

• This method of locating a title is available only on a disc that

contains a top menu.

• Instruction notes of discs may refer to the button that

displays the top menu as TITLE button.

TV/VIDEO

TV power

VOL

TOP MENU

/ / /

2, 4

/ ENTER

ENTER

FWD

REV

PLAY

PAUSE/STEP

Correction

DVD display

Number buttons

TOP MENU

• Connect the power plug securely into the

wall outlet.

• Press the PLAY button.

"DTS" and "DTS Digital Out" are

trademarks of Digital Theater Systems,

. Otherwise, high volume sound may

56 61

Inc.

• Select the appropriate video input mode

on the TV so the picture from the DVD

DVD audio disc

• Use DVD video discs or audio

player appears on the TV screen.

CDs encoded via the DTS

Group 2

• Connect the video cable securely into the

recording system.

To resume normal playback, press the

Track 1

Track 2

appropriate jacks.

• Make the following setting.

PLAY button.

ANALOG

• Select the correct input mode of the

5.1CH

SURROUND

BITSTREAM

/PCM

On-screen display

audio receiver so you can listen to the

sound from the DVD player.

DIGITAL

To wall outlet

• Connect the audio cable securely into

"Digital Output"

the appropriate jacks.

Playback starts.

• Turn on the equipment connected with

the audio cable.

"Analog Output"

buttons to select a track you

• Select the proper audio setting.

Recording system

• Eject the disc and clean it.

• Sometimes a small amount of picture

distortion may appear. This is not a

TV or monitor with

To video input

malfunction.

(yellow)

audio/video inputs

• Connect the DVD player directly to the

(white)

TV. Avoid connecting the DVD player to

a VCR or TV/VCR combination.

To audio inputs

(red)

• Insert a disc.

• Insert a playable disc. (Check the disc

type.)

To S video input

, REPEAT

and RANDOM

• Place the disc with the playback side

• Use DVD video discs encoded via

down.

Playback starts from chapter 1 of the

the MPEG2 recording system.

• Place the disc correctly inside the guide

selected title.

• Make the following setting.

on the disc tray.

• Clean the disc.

On-screen display

• Make the following setting.

• Cancel the parental lock function or

On-screen display

change the parental lock level.

"Digital Output"

PLAY

ANALOG

5.1CH

• These operations may prevent a proper

SURROUND

BITSTREAM

/PCM

"Analog Output"

progress of the contents.

COAXIAL OPTICAL

DIGITAL

"Analog Output"

• Press and hold the ON/STANDBY button

on the front panel for more than about 3

seconds. The DVD player turns off.

Recording system

Press the button again to turn it on. If the

• Even if "Analog Output" is set to

buttons still do not work, disconnect the

power plug and insert it into the wall

"Multi," sound will be output in

outlet again.

bitstream format.

• Point the remote control at the remote

sensor of the DVD player.

• Operate the remote control within about

7 m.

• Replace the batteries with new ones.

PAUSE

PLAY

STOP

Page

Signal flow

18, 19

Track 3

Select:

Page

"Bitstream"

18-23

"PCM"

"Stereo"

42, 56

DTS

–

functions

Select:

Page

56, 63

Select:

Page

"Bitstream"

–

"Stereo"

–

MPEG

Table of Contents

Caution; Connections; Connecting To A Tv - Toshiba sd-4800 Owner's Manual

Connections

Connecting to a TV

CAUTION

Related Manuals for Toshiba sd-4800

Related Content for Toshiba sd-4800

Table of Contents