Dvd To Cassette Tape Duplication; Dvd Functions; Playback - Toshiba SD-V296KU Owner's Manual

DVD to Cassette Tape Duplication

This will be possible only if the DVD is not copy protected.
Before you begin:
• Insert a cassette tape in the cassette compartment. Make sure
the tape's record tab is intact and the tape is long enough to
record the DVD.
• Insert the DVD you want to copy in the disc tray.
• Turn on the TV and set it to the correct Video In channel. (Check
your TV owner's manual for details.)
1 Press [DVD]. Press [PLAY B] to play back the disc, then press
[PAUSE F] at the point where you want to start the recording.
Press [VCR] so VCR indicator lights up on the
2
front panel.
Press [INPUT SELECT] repeatedly until
"DISC" appears on the TV screen.

Playback

Before:
Turn on the TV, amplifier and any other
components which are connected to this
unit. Make sure the TV and audio receiver
(not supplied) are set to the correct
channel.
1 2
Insert a disc with
label facing up.
OPEN/CLOSE
3 4
To start playback To stop playback
PLAY
Disc Menu
DV DVD
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
DVD DV
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Note:
• Menu operations may vary depending on the disc. Refer to the manual
accompanying the disc for details.
Resume Playback
Press [STOP C] during playback.
Resume message will appear on the
TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Note:
• To cancel resume, press [STOP C] one more time in the stop mode.
• For JPEG, playback will resume from the beginning of the track at which
playback was stopped.
• The resume playback information stays on even when the power is
turned off, as long as the disc stays in the unit.
EN
E8EB5UD_SD-V296KU_EN_ES_v1.indd 17 E8EB5UD_SD-V296KU_EN_ES_v1.indd 17
DISC

DVD FUNCTIONS

1
DV DVD
3
4
Note:
• When you play a JPEG-format disc, details on page 19.
• " " may appear at the top-right on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may be played from title 2 or 3 due to specific programs.
• Some discs may not start playback automatically. Then, press [PLAY B] to start playback.
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st
STOP
layer is being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language for DVD function in "PLAYER MENU" menu. Refer to page 23.
DV DVD
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
e.g.) DVD
3 Press [SPEED] repeatedly until the desired tape speed (SP or SLP)
appears briefly on the screen.
For details about tape speed, refer to page 16.
4 Press [REC/OTR] to start recording. "REC" will appear on the display
panel.
5 Press [DVD]. Press [PLAY B] to play back the disc.
• To pause the recording, press [VCR], then press [PAUSE F] once.
REC indicator on this unit will flash.
• To resume recording, press [REC/OTR] or press [PAUSE F] again.
REC indicator on this unit will light up again.
• To stop recording, press [VCR], then press [STOP C].
Note:
• A Timer Recording or Satellite Link is not available during DVD to
cassette tape duplication.
1
Lights up when power is on.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
DV DVD
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
• For DVD, set "STILL MODE" to "FIELD" in "DISPLAY" menu if pictures in
the pause mode are blurred. Refer to pages 23-24.
To use [SKIP H / G]
Press [SKIP G] once to skip to the next title, chapter or track.
Press [SKIP H] twice (once for JPEG) in quick succession to skip
back to previous title, chapter or track.
For JPEG files, [s / B] is also available.
Fast Forward / Reverse Search
DV DVD
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To continue playback, press [PLAY B].
Note:
• For DVD, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).
• For audio CD approximate speed is 1(2x), 2(8x), 3(30x).
– 17 –
1 2 4 3
DVD DV
DVD DV
1
E
2008/07/14 10:37:33 2008/07/14 10:37:33