Auto Repeat; Recording; Recording & One-Touch Timer Recording (Otr); Timer Recording - Toshiba SD-V296KU Owner's Manual

Auto Repeat

The unit will automatically rewind the cassette tape when it has reached the end and will automatically start playback unless you press
[STOP C] or you turn off the unit.
VCR VCR
1 Press [SETUP], and choose "AUTO REPEAT".
SETUP
Note:
• The auto repeat function can also be set "ON" or "OFF" by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the stop mode.

Recording

This unit has no tuner system so it cannot receive TV broadcasts without external
tuner or such devices.
Note:
• You can also set to external tuner. Refer to "Satellite Link" on page 16.
Recording & One-touch Timer Recording (OTR)
VCR VCR
1 Insert a recordable
cassette tape.
3 Press [SPEED] to select the desired tape speed.
SPEED
Tape speed
Type of tape
SP mode
SP
SLP mode
4 Press [REC/OTR] until desired recording time is selected.
REC/OTR
REC
(normal recording)
REC
5
Press [STOP C] to
stop recording.
STOP

Timer Recording

VCR VCR
• Insert a recordable cassette tape.
• Make sure to turn on the external
tuner.
Press [SETUP]. Select "TIMER PROGRAMMING".
1
SETUP
E8EB5UD_SD-V296KU_EN_ES_v1.indd 14 E8EB5UD_SD-V296KU_EN_ES_v1.indd 14
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
or
2 Press [INPUT SELECT] until "L1" or
"L2" is displayed on the TV screen.
Select "L1" to activate rear input jacks.
Select "L2" to activate front input jacks.
INPUT
SELECT
See note on the right.
Recording / playback time
T60 T120 T160
1hour 2hours 2-2/3hours
3hours 6hours 8hours
OTR (0:30) OTR (1:00).....
OTR (8:00) OTR (7:30)
6
Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
OPEN/CLOSE
- M E N U - TIMER PROGRAMMING
B TIMER PROGRAMMING
PROG 12345678
SATELLITE LINK
DATE
AUTO REPEAT [OFF]
START TIME
CLOCK SET
END TIME
LANGUAGE SELECT
L1/L2
REC SPEED
Available program number flashes.
2
Press [B] to "AUTO REPEAT" to set "ON" or "OFF".
[OFF]
Press [SETUP] to exit.
TV
1 5 6
To stop recording temporarily (pause mode)
Press [PAUSE F].
• During the recording in pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Note:
• Do not change the external tuner's channel while you are recording.
You CANNOT watch one channel and record another at the same time.
• Connect your external tuner to the L1 (rear panel) jacks of the unit.
Connect camcorders and other such devices to the L2 (front panel)
jacks. Refer to page 11.
Accidental Erasure Prevention
To prevent accidental recording, remove erase-
protection tab of the cassette tape. To record
on it later, cover the hole with adhesive tape.
Select an empty program number.
2
Then press [B] to go to next step.
or
– 14 –
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
external tuner
this unit
6
3
2
5
4
4
erase-protection tab
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – –
END TIME – – : – –
L1/L2 – –
REC SPEED – –
2008/07/14 10:37:13 2008/07/14 10:37:13
[ON]
– –
– –
EN