Altec Lansing M812 Functional Description page 4

Hide thumbs Also See for M812:

2. Bass - Increase or decrease bass setting. Select this option by pressing and

releasing the input button. Adjust this option by pressing the Vol buttons.

The current bass setting is displayed on the LCD.

3. FM Mode – Select the appropriate region for FM reception. Select this

option by pressing and releasing the input button. Adjust this option by

pressing the Vol buttons. The current FM region setting is displayed on

the LCD.

4. RF Chan – Adjust the RF module's receiving channel. Select this option

by pressing and releasing the input button. Adjust this option by pressing

the Vol buttons. Channel selections are channel 1 through channel 3 and

Auto. Auto will force the RF module to search for a valid transmission

from a docking station. The current RF Channel setting is displayed on

the LCD.

IR Prog – IR programming mode. Select this option by pressing and

releasing the input button. You can select between 3 buttons to program:

Trk Fw, Trk Bk and Play/Pause. Select the desired button to program and

press and release the input button to select it. The LCD will display

"START". To program an IR remote function, aim the desired remote at

the M812 and press the button on the remote you want to record. The

LCD will display "DONE" when programming is complete. The recorded

command can now be re-transmitted by connecting the IR LED to the

docking station, entering AUX input mode and pressing the associated

button either on the side of the speaker unit (Trk Fw and Trk Bk only) or

the wireless remote. The IR LED must be aimed at the unit you are trying

to control in order for it to work.

6. Default – Enter default mode. Select this option by pressing and releasing

the input button. You can select local or factory by pressing the vol

buttons. Local default is described in the Standby option. Factory

defaults will set the entire system to default including local and system