Altec Lansing M812 Functional Description page 3

Hide thumbs Also See for M812:

c. Hold for 6 seconds and release – The wireless connection will be reset if the

speaker unit is synchronized to a docking station. This can be useful if the

receiver has synchronized to an unwanted docking station.

2. Vol-/Vol+ - The Vol buttons have two functions:

a. Local volume – When idle, these buttons will control the volume of the

speaker unit only. If multiple speaker units are connected, their volume level

is not affected. Volume is displayed on the LCD.

b. Menu position – When in menu mode, the Vol buttons act as increment and

decrement buttons for the menu tree.

3. Trk FW/Trk BK – The Trk buttons have three functions:

a. iPod track change – When idle and iPod is selected as the input source, the

Trk buttons allow you to move forward or back in your iPod play list.

b. FM station selection – When idle and FM is selected as the input source, the

Trk buttons allow you to tune or seek the next available FM station. The

station is displayed on the LCD.

c. IR transmission – When idle and Aux is selected as the input source, the Trk

buttons allow you to transmit the IR Remote command that is associated with

those buttons.

4. Input – The input button has two functions:

a. Single press and release – Audio input selection. Select between Aux, FM

and iPod. The selected input is displayed on the LCD.

b. Hold for three seconds and release – Enter Menu mode. You can use the Vol

buttons to scroll up or down through the options. Pressing and releasing the

input button will select the displayed option. The menu can be divided into 7

selections as follows:

1. Treble – Increase or decrease treble setting. Select this option by pressing

and releasing the input button. Adjust this option by pressing the Vol

buttons. The current treble setting is displayed on the LCD.