Connections; Connecting To A Tv; Connecting To A Tv (Using The Component Video Jacks) - Toshiba SD-6100KU2 Owner's Manual

Connections

Connections

Connecting to a TV

Connect the DVD player to your TV.
Connecting to a TV
Normal TV
S-Video cable (not supplied)
If the TV has a S-video input, connect the DVD player
with an S-video cable. When using an S-video cable,
To audio To video do not connect the yellow video cable and component
input input
video cables (Y/P
(yellow)
Audio/Video cables (supplied)
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and
then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.

Connecting to a TV (Using the component video jacks)

Interlaced outputs (ColorStream ® )
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality
picture playback.
Actual labels for component video inputs may vary depending on
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
ToY video
input
To P video
B
input
To P video
R
input
T o audio input
To VIDEO
OUT
(yellow)
/P ).
B R
Progressive outputs (ColorStream Pro
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
Consumers should note that not all high definition television sets
, C )
B B
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the "standard definition" output. If there are questions regarding our
TV set compatibility with this model 480p DVD player, please contact
our Customer Service Center.
To 2ch AUDIO OUT
(R: red, L:white)
Audio cable
To 2ch AUDIO OUT
(R: red, L: white)
• Make the following setting.
On-screen display Select: Page
"Off",
"Digital Output"
32
"PCM" or
"Raw"
S-VIDEO
"Video Output"
Component 31
P-Scan
HDMI
® )
11