Setting The Camera's Dip Switch - DW Star-Light Plus DWC-PTZ220XW User Manual

2.5 Setting the camera's DIP switch

To access the camera's DIP switch, open the DIP switch cover at the bottom of the
camera and change the setting of the DIP switch as needed. Once the
updated, close the cover tightly to ensure waterproofing.
1. Control the camera's video signal and video type using D1 and D2, respectively, in
the S1 switch.
S1-
D1
OFF
ON
2. Set the camera's CVBS output with D1 in the S2 switch.
S2-
D1
Off
On
3. Set the coaxitron protocols using D3 and D4 in the S1 switch.
S1-
D3
OFF
ON
OFF
ON
Video signal
HD-TVI output
HD-Analog
Output
WDR WDR
type off/on
Off
True
WDR On
Off
Digital
WDR On
S1-
HD-TVI output
D4
OFF HD-TVI-C
OFF Pelco-C
ON Reserved
ON Reserved
S1 S2
S1-
D2
OFF
ON
CVBS
output
Enabled
Disabled
Enabled
Enabled
HD-Analog output
A_CP-PTZ
Reserved
Reserved
Reserved
9
settings are
Video type
NTSC
PAL
HD
output
Enabled
Enabled
Enabled
Enabled