Kärcher LEUCO HAWK NMT-EBCW Series Instruction Manual For Operation And Maintenance page 21

NOZZLE TABLE
The table below is used to correctly select the nozzle based on the pump specifications (max. pressure and flow rate factor). The table shows an example (pump with Pmax=100 bar
and Flow rate=15 l/min).
Select the pressure value in
the first line and move down
the table until the flow rate
factor that is closest by
defect to the pump rate,
then identify the suitable
nozzle type for the required
values. We recommend
selecting the nozzle
corresponding to the flow
rate factor immediately
below the closest value (in
the example, the value
circled in green with the
uninterrupted line) in order
to preserve the desired
pressure values over time.
This Manual is the exclusive property of the Manufacturer. Reproduction, in any form whatsoever, even partially, is prohibited.
Instruction Manual
High pressure piston pumps – NMT-EBCW, NMT-EBCH, XLTI-EBCH, XLT-ESA
Rev. 0
Page 21 of 25