Table of Contents
Advertisement
BeHear ACCESS User Manual
Device Overview
BeHear ACCESS is a neck band style headset comprised of:
A – Electronics compartment
B – Left and right earpieces
C – Left and right control boxes
Icon
Component
1
Notification LED
2
Micro-USB port
3
Charging port
4
Power button
5
Volume up button
Multi-functional
6
button
7
Volume down button
Hearing volume up
8
button
Product Name: BeHear ACCESS
Function
Flashing red and blue
Flashing blue
Flashing red
Flashing purple
Steady red
Steady green
Light blue
Open the cover to insert the supplied cable to charge the battery.
Place this side down in the charging cradle to charge the battery.
Press and hold down to turn BeHear ACCESS on and off.
Press briefly to show battery level (when BeHear ACCESS is on).
Press (short presses or continuous press) to increase call/audio
volume.
Handle phone calls (read
Handle listening to audio (read
Press (short presses or continuous press) to decrease call/audio
volume.
Press (short presses or continuous press) to increase ambient sound
volume.
Product No.: ABH-120
Headset is in Bluetooth pairing mode
Headset is connected to the Bluetooth
device
Headset is not connected to the Bluetooth
device, or the battery is low
Personal hearing is active
Headset is being charged
Headset is charged (battery level >50%)
Headset is powered on/off (toggle)
Handling Phone
Calls)
Listening to
Audio)
Doc. No. BHAUM202012.31
Page 6 of 39
Advertisement
Table of Contents
