Application Settings - Wear & Hear BeHear ACCESS User Manual

BeHear ACCESS User Manual

Application Settings

 Language
This setting defines the language of the app interface.
 Hearing Assessment Mode
This setting defines the type of hearing assessment to be performed:
Basic – the assessment contains one measurement (hearing
•
threshold) for each ear.
Advanced – the assessment contains two measurements (hearing
•
threshold and most comfortable level) for each ear.
The recommended setting (application default) is Basic.
 Headset Update Check
This setting determines how checks for headset firmware updates will
be performed:
Auto – app checks for updates automatically
•
• Manual – user needs to enter Headset Update screen and check
for an available update
The recommended setting (application default) is Auto.
 Headset Update Download
This setting determines the preferred network connection when
downloading updates for the headset firmware:
Wi-Fi only – the app performs the headset update automatically
•
only when the phone is connected to the Internet via local Wi-Fi
network. A warning notice is displayed when you initiate the
update when a Wi-Fi connection is not available.
• Any Network – app performs the headset update when the phone is connected to the
Internet via any network – Wi-Fi or cellular.
The recommended setting (application default) is Wi-Fi only.
 Notifications
This setting controls the behavior of warnings and notifications about unsaved changes to
hearing parameters made in the Personal Hearing screen.
The recommended setting (application default) is OFF.
 Reset Settings
Tap the RESET button to restore application defaults.
Product Name: BeHear ACCESS Product No.: ABH-120
Page 31 of 39
Doc. No. BHAUM202012.31