BeHear ACCESS User Manual
Handling Mobile Phone Calls
Use the left-hand control box on the headset cable to handle mobile phone calls, as follows:
•
To answer a call press
•
To end a call press
•
To reject a call press and hold down
To transfer a call in progress to the phone, press and hold down
•
via the phone. To return the call to the headset, press and hold down
To redial the last dialed phone number double click
•
•
To increase call volume press
long tone will be heard once you reach the maximum volume level.
•
To decrease call volume press
A long tone will be heard once you reach the minimum volume level.
EasyListen™ – Slowing Down Incoming Speech
You can slow down incoming speech for mobile phone calls, making it more intelligible. The
EasyListen function can be controlled from either the headset or the W&H BeHear app.
Use the right-hand control box on the headset cable to manage EasyListen:
To activate and deactivate EasyListen press and hold down the
•
a toggle. A voice prompt will be heard once your choice is accepted.
•
To scroll through the speech tempo options, quickly press the
active. Voice prompts naming the speech tempo will be played.
Enable EasyListen and adjust the speech tempo using the W&H
BeHear app, as follows:
•
Once the phone call has been established, bring the W&H BeHear
app to the foreground on your phone.
Tap the Slow, Slower or Slowest button to activate EasyListen and
•
set the desired speech tempo.
Tap the Normal button to deactivate EasyListen. Speech tempo
•
reverts to normal.
Listening to Audio
You can listen to audio from your phone or any other paired and connected Bluetooth device
using your BeHear ACCESS headset.
Use the left-hand control box on the headset cable to handle audio play as follows:
•
Press
to play an audio source from the connected Bluetooth device. To pause the source
press
again.
•
To increase audio volume press
volume level.
To decrease audio volume press
•
volume level.
•
Double press
•
Triple press
To switch between two connected audio sources (for example, between the HearLink
•
transmitter and a smartphone) press
Product Name: BeHear ACCESS
when you hear an incoming call signal.
during an ongoing call.
. A short tone will be heard indicating change of volume. A
. A short tone will be heard indicating change of volume.
. A long tone will be heard once you reach the maximum
. A long tone will be heard once you reach the minimum
to forward to the next audio track.
to return to the previous audio track.
Product No.: ABH-120
when you hear an incoming call signal.
.
and
simultaneously.
Page 18 of 39
. The call will continue
again.
button, which works as
button when EasyListen is
Doc. No. BHAUM202012.31