Connection With An Ios Phone - Wear & Hear BeHear ACCESS User Manual

BeHear ACCESS User Manual

Connection with an iOS Phone

1. Tap the BeHear ACCESS icon in the Connection screen to initiate connection with your
headset.
2. Tap NO if your headset is not paired with the iPhone, otherwise tap YES.
3. When your selection is NO:
a. Follow the on-screen animated instructions to place your headset into
pairing
• Make sure the BeHear ACCESS headset is powered OFF.
• Then, press and hold down the power button
seconds, until the headset vibrates and the LED alternates red/blue.
b. Use the Bluetooth section of the Settings application on your phone to add BeHear
ACCESS to the list of My Devices.
c. Return to the W&H BeHear app and tap YES in the connection screen.
4. When your selection is YES:
a. The product name BeHear ACCESS followed by the last several characters of the
device's serial number will appear in the list of Available devices. You can verify the
device by checking that the serial number printed on the underside of the BeHear
ACCESS headset (on the white label) matches the number in the list.
b. The Bluetooth Pairing Request prompt appears.
c. Select Pair and wait for 2-3 seconds to complete the synchronization.
d. When the pairing and connection process is complete the headset will be listed in the
Paired devices section, followed by a .
Product Name: BeHear ACCESS
mode:
Product No.: ABH-120
Page 23 of 39
Bluetooth
on the headset for up to 5
Doc. No. BHAUM202012.31