Connecting Your Tv; Connecting A Vcr; Connecting A Cable Converter Box - Toshiba 27A10 Owner's Manual

Connecting Your TV

If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F"
connectors.
Audio and video cables are usually color coded according to
use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo (or mono) left channel. If you look at
the rear panel of the TV, you will see that the terminals are
color coded in the same manner as the cables.
S-video cables provide better picture performance. S-video
cables can only be used with S-video compatible components.
ColorStream™ cables come in sets of three and provide the
best picture performance. ColorStream cables can only be
used with ColorStream compatible components.

Connecting a VCR

This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and to record
from one channel while watching another channel.
Cable lead-in or
antenna
Stereo VCR
S-VIDEO VIDEO OUT
L R
IN
OUT
OR

Connecting a cable converter box

This connection allows you to watch cable and premium channels.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
broadcast area), then use the converter box to change channels.
From cable
IN OUT
Cable converter
box
IN from ANT OUT to TV
CH3
CH4
TV
IN OUT
COLOR
VIDEO
VIDEO VIDEO STREAM
INPUT
Y
L/ L/
L
MONO MONO
S-VIDEO
AUDIO AUDIO C AUDIO
B
R R R
C
R
VIDEO-1 VIDEO-2
TV
IN OUT
ANT
COLOR
VIDEO VIDEO STREAM VIDEO
INPUT
Y
L/ L/
L
MONO MONO
S-VIDEO
AUDIO AUDIO C AUDIO
B
R R R
C
R
VIDEO-1 VIDEO-2
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
C a u t i o n :
If using a mono VCR, connect L/Mono to VCR
Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the S-video
cable to VIDEO 1 simultaneously.
ANT
Note:
The VIDEO 2 jacks can also be used for connect-
ing a second piece of video equipment, such as a
video disc player or camcorder etc. with audio/
video outputs.
Note:
When you use a converter box with your TV,
there may be features that you cannnot
program using the Remote Control, such as
blocking channels, and programming your
favorite channels.
Antenna Coaxial Cable
AUDIO/VIDEO Cables
S-Video Cable
ColorStream Cable
5