Advertisement
❶
• Push Button - Requires two CR2450 watch
batteries (included with push button)
• Motion Sensor - Requires one 2600mAh AA size
Lithium-Thionyl Chloride battery (3.6V or 3.7V)
(included with motion sensor)
❷
Pair the Push Button or Motion Sensor to the module.
You Will Need:
• Control-R™ Module
• Push Button and/or Motion Sensor
• Phillips Head Screwdriver (Motion Sensor only)
Ensure the module LED has been solid red for at least
one minute prior to beginning the pairing process.
Advertisement
