Page 1
Control-R™ Wi-Fi Module Installation Manual For Your Records If you have support questions, please call Customer Care and have your Control-R™ Wi-Fi module’s AYLA ID and Water Heater Serial Number available. Water Heater Serial Number: (Located on side of water heater) AYLA ID: (Located on back of Control-R™...
The Control-R™ Wi-Fi Module attaches easily to the Rinnai Tankless Water Heater by a two wire interface quickly connecting through the local Wi-Fi network. Once connected and the free Rinnai App is downloaded, the Rinnai Tankless Water Heater can be associated to the Rinnai independent dealer.
Compatible with all Rinnai Tankless Water Heater models manufactured 2006 and later (except the RH180 Hybrid Tank-Tankless Water Heater). Note: The Lime Condition (LC) notification will not appear in the Rinnai App when the module is paired with the following series of Rinnai...
For outdoor water heaters, the module must be installed indoors. • The module is magnetic and can be placed on the side of the Rinnai tankless water heater (indoor models only) or mounted to a wall. See the next section for installation instructions.
Page 11
If you have already registered a module complete registration. to the Rinnai app, press the + symbol in When the account has been confirmed the top, right corner to add another through the emailed link, return to the module to the Rinnai app.
Page 17
The Rinnai app allows you to select a Rinnai dealer to monitor your water heater for maintenance and status. • To assign a dealer to your water heater, enter the dealer’s email address and tap Assign Dealer Monitoring. • The email address can be obtained by contacting your preferred dealer.
(if required). • connect. Press Cancel in the Rinnai App and repeat the setup process starting from pairing the module with the Rinnai App. Module is paired and connected (LED is Return to the Add Device screen. Press the Connect button on the blinking blue) to Local Area Network module and then press the Register button in the Rinnai App.