To Memorize Channels - Toshiba MW14F51 Owner's Manual

To memorize channels

This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit's memory. In addition to normal
VHF and UHF channels, this unit can receive up to 113 cable TV
channels. To use this unit with an antenna, set the TV/CABLE
selection to the TV position. When shipped from the factory, this
selection is in the CABLE position.
TV/CABLE selection
1 Press MENU in the TV mode, then press
to select option.
2 Press or to select "TV/CABLE".
3 Press or to select "TV" or "CABLE".
TV - VHF/UHF channels
CABLE - Cable TV channels
4
Press MENU repeatedly until the menu screen is
cleared.
Cable TV chart
The chart below is typical of many cable system channel
allocations.
5T90101A [E]p23-27
or
TV/CABLE CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / / MENU
TV/CABLE CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / / MENU
TV/CABLE TV
AUTO CH MEMORY
ADD/ DELETE
/ / / / MENU
27
Automatic memory tuning
Press or to select the "AUTO CH MEMORY",
then press .
The TV will begin memorizing all the channels available
in your area.
To ADD/DELETE channels
1
Press or to select "ADD/DELETE", then
press .
2
Select the desired channel to be added or
deleted using Direct channel selection buttons
/
(0–9) or .
3 Press or to select "ADD" or "DELETE",
whichever function you want to perform.
Note:
option if you set the channel to "LINE".
You can not select
3/8/05, 10:24 AM
0–9
/ / /
MENU
TV/CABLE CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / MENU
TV/CABLE CABLE
AUTO CH MEMORY
ADD/ DELETE
/ / / MENU
ADD CH 001
0-9 / / / / / MENU
27