Operations
Settings
Child Lock
To prevent children or infants from
accidentally starting or setting the washing
machine, Child Lock locks all buttons except
for the Power button.
• To set the Child Lock function, hold down
Temp. and
3 seconds. To activate, press
Start/ Pause.
• To release the Child Lock function,
hold down
simultaneously for 3 seconds.
NOTE
• In the Child Lock state, you must first
release the Child Lock if you want to add
detergent or laundry.
• Your setting will be kept even after
restarting the machine.
• You cannot open the door after a wash
cycle when the Child Lock is on. Turn the
function off before opening the door to
take out the laundry.
44 English
WD80TA046BE_04200B-03_EN(Indicative).indd 44
Rinse simultaneously for
Temp. and
Rinse
Sound On/Off
You can turn on or off the sound from the
washing machine. When this function is set
to Off, the melody of cycle completion, and
the power-off beep will not sound. However,
the other sounds stay active.
• To mute the sound, hold down
Rinse and
Spin simultaneously for
3 seconds.
• To unmute the sound, hold down again
for 3 seconds.
• Your setting will be kept even after
restarting the machine.
2021/2/24 14:58:22