Samsung WD9 TA Series User Manual page 43

Option
Bubble Soak
Dry Option
Option
Cupboard dry
Time Dry
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time
the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to finish a two-hour cycle 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m. Then,
what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00 p.m.
Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
WD80TA046BE_04200B-03_EN(Indicative).indd 43
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to
5 cycles: Cotton, Synthetics, Hygiene Steam, Mixed Load and
Wash+Dry.
• Select to dry laundry automatically by detecting the amount
and weight of the laundry. Select this to dry cotton clothing
such as cotton trousers, T-shirts, and cotton underwear.
• Use to dry the laundry for a specified period of time
according to the material, load, and moisture.
3:00 pm
Start
Description
Description
5:00 pm
End
English 43
2021/2/24 14:58:21