Definitions; General Safety Information - Emerson Bettis G Series Installation, Operation And Maintenance Manual

Section 1: Introduction
December 2020
1.2

Definitions

WARNING
!
If not observed, user incurs a high risk of severe damage to actuator and/or fatal injury
to personnel.
CAUTION
!
If not observed, user may incur damage to actuator and/or injury to personnel.
NOTE:
Advisory and information comments provided to assist maintenance personnel to carry out
maintenance procedures.
1.3

General Safety Information

Products supplied by Bettis, in its "as shipped" condition, are intrinsically safe if the
instructions contained within this Service Instruction are strictly adhered to and executed
by well trained, equipped, prepared and competent personnel.
WARNING
!
Read warning signs. For the protection of personnel working on Bettis actuators, this
procedure should be reviewed and implemented for safe disassembly and reassembly.
Close attention should be noted to the WARNINGS, CAUTIONS and NOTES contained in
this procedure.
WARNING
!
Follow plant safety procedures. This procedure should not supersede or replace any
customer's plant safety or work procedures. If a conflict arises between this procedure
and the customer's procedures the differences should be resolved in writing between an
authorized customer's representative and an authorized Bettis representative.
2
Installation, Operation and Maintenance Manual
VA-DC-000-1878 Rev. 0
Introduction