Setup; Mounting The Battery Charger (Optional); Assembling The Grass Bag - Toro Flex-Force Power System 20367 Operator's Manual

Setup

Note:
The battery pack is not fully charged when it is purchased. Before using the machine for the first
time, refer to Charging the Battery Pack (page
1
Mounting the Battery
Charger (Optional)
Parts needed for this procedure:
2 Mounting hardware (not included)
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 3 for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
Figure 3
15).
2

Assembling the Grass Bag

No Parts Required
Procedure
g290534
8
Figure 4
g235791