Download Print this page
RCA SPS3911 User Manual

RCA SPS3911 User Manual

Under cabinet speaker dock

Advertisement

Quick Links

User manual
Under Cabinet Speaker Dock
SPS3911
It is important to read this instruction book prior to using your new product for the first time.
Il est important de lire ce manuel d'instructions avant d'utiliser l'appareil pour la première fois.
Es importante que lea este libro de instrucciones antes de comenzar a usar su nuevo producto.

Advertisement

loading

Summary of Contents for RCA SPS3911

  • Page 1 User manual Under Cabinet Speaker Dock SPS3911 It is important to read this instruction book prior to using your new product for the first time. Il est important de lire ce manuel d’instructions avant d’utiliser l’appareil pour la première fois.
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS FCC INFORMATION • The ventilation should not be impeded by This device complies with Part 15 of the FCC covering the ventilation openings with items rules. Operation is subject to the following two such as newspaper, table-cloths, curtains, etc. conditions: •...
  • Page 3: Power Supply

    POWER SUPPLY USING THE AC ADAPTER Using an AC adapter other than the one supplied with the unit may damage the unit. Caution: • Before use, ensure the rated voltage of the adapter matches your local voltage. • The included AC adapter is for use with this unit only. Do not use it with other equipment. •...
  • Page 4: Location Of Controls

    ACCESSORIES Please locate the included accessories. To order replacement units, visit www.RCAav.com. Remote control (with 2xAAA batteries) ......x 1 AC power adapter ..............x 1 Mounting Screws (5x69 TM) ..........x 4 Spacers 1.06” (27mm) ............x 4 Spacers 0.57” (14.4mm) ...........x 4 Mounting Template ............x 1 LOCATION OF CONTROLS Standby/ON button...
  • Page 5: Mounting Instructions

    MOUNTING INSTRUCTIONS TOOLS NEEDED: 1) Electric drill with 1/4” bit; 2) Phillips-head (cross style) screwdriver. STEP 1 STEP 2 If your cabinet does NOT have an overhang: Use an electric drill with a ¼” drill bit (not included) a) Place the Mounting Template in the desired to drill all four holes marked on the Mounting location inside or underneath the cabinet Template (see Figure 3).
  • Page 6 c) Hold the unit up against the bottom of the e) Partially tighten each screw, but do not fully cabinet, and align the four holes on the top of tighten the screws until all of them have been the unit with the screws. Partially tighten each started (see Figure 6).
  • Page 7: Bluetooth Pairing

    CONNECTION Plug the AC power adapter into the nearest wall outlet, and wrap the remaining cord around the cord storage knob at the rear of the unit. BLUETOOTH PAIRING Before Bluetooth pairing, you should turn on the Bluetooth function of your other device (such as, mobile phone with Bluetooth function).