Displaying Tv Status Information; Viewing Support Information; Resetting To Factory Defaults; Power Failure - Toshiba 42SL417U Owner's Manual

Displaying TV status information

To display TV status information:
Press Q.
The following information will be displayed
(if applicable):
•Current input (ANT/CABLE, Video, etc.)
•Either "CABLE" (for cable TV) or "ANT" (for overthe-
air broadcasts), if ANT/CABLE is the current input.
•Channel number (if in ANT/CABLE mode)
•Input label (if set)
•Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signals only)
•Stereo, Mono, or SAP audio status (when in HDMI
input mode, PCM)
•Video resolution
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status (if available)
•GameTimer (if set)
•Channel Label (if set or received)
To close the screen:
Press Q again.
The following additional information (only available
for ANT/CABLE input) will display for off-air digital
channels (if applicable):
•Title
•Duration
•Detailed description
To display the next program's information for digital
channels, press Q again. Pressing Q a third time will
remove the entire banner.
ANT
480i
2-2
Nashville WX Channel
Nashville WX Channel provides Middle Tenessee and Southern Kentucky
weather.
44
Chapter 6: Basic features
NONE
4:3
8:59am - 4:59pm EST

Viewing support information

1
> Settings > SETUP > System Information.
2
Press to display support information containing
OK
Web/Customer service numbers for US, Canada,
and Mexico.

Resetting to Factory Defaults

You can reset all settings and channels.
1
> Settings > SETUP > Reset TV >
2
Enter your PIN code (if a PIN code has been set).
3
A confirmation screen appears. Select Yes, and
press . The TV will turn off automatically.
O K
To cancel the reset:
Press C or c to select No. Press

Power failure

If power is lost while you are watching the TV, the
Last Mode Memory feature automatically turns on the
TV when power is restored.
.
O K
.
O K