Using Channel Return; Using Surflock; Selecting The Video Input To View - Toshiba 42SL417U Owner's Manual

Using Channel Return

You can switch between two channels without entering
a channel number each time. This feature also works for
external inputs.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (
3
Each time you press
CH RTN
and forth between the last two channels that were
tuned.
™

Using SurfLock

™
The SurfLock feature temporarily memorizes one
channel to the button, so it can be quickly
CH RTN
returned to from any other channel. This feature also
works for external inputs.
To memorize a channel to the
1
Tune to the channel you want to program to the
button.
CH RTN
2
Press and hold for about 2 seconds until the
CH RTN
message "Memorized" appears. The channel has
been programmed to the
3
You can then change channels repeatedly, and
when you press
CH RTN
be tuned.
After pressing and then changing channels again,
CH RTN
the memory is cleared and the button functions as
Channel Return.
34
Chapter 6: Basic features
) button if needed).
-
, the TV switches back
button:
CH RTN
button.
CH RTN
, the memorized channel will

Selecting the video input to view

To select the video input to view:
1
Press on the remote control or TV control
INPUT
panel.
2
Change the input:
• Press 0–8.
Repeatedly press B or b. Press
•
Repeatedly press
•
INPUT
Inputs
0 ANT/CABLE ANT/CABLE
1 Video 1
2 Video 2
3 ColorStream HD1
HDMI 1
4
5 HDMI 2
6 HDMI 3
7 HDMI 4
8 PC
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling video inputs" on p. 30).
• You can skip sources (- "Skipping video inputs" on p.
29).
• Inputs that are set to be skipped will not be available and
will be skipped when selecting inputs by repeatedly
or B or b.
pressing
INPUT
• You can select inputs that are set to be skipped using the
number buttons.
• If one or more HDMI ® CEC devices are connected to an
HDMI input, the icon (
In this case, the label (- p. 30) will not appear on the
input selector.
• When the Auto Input feature is set, you can select a video
input source with the remote control by pressing and
holding the corresponding MODE SELECT button for 2
seconds (- p. 31).
®
To select an HDMI CEC device:
1
Press B or b to select an HDMI input.
2
Press c. The list of HDMI
input appears.
3
If the input has multiple HDMI
B or b to select a device.
4
Press .
O K
.
O K
.
) appears in the input selector.
®
CEC devices for that
® CEC devices, use