Accessing Medlink Lite Settings; Changing Medlink Lite Settings - Humanscale MedLink Lite User Manual

3.2 ACCESSING MEDLINK LITE SETTINGS

By design and intended purpose, MedLink allows only 1 labelled patient-specific drawer to open at once. This is to prevent
multiple patients' medication being accessible at once. Drawers set as Storage drawers can always open in addition to normal
labelled drawers, as these drawers should not be used to store medication.
1. From any screen on the interface, touch the "gear" icon in the header to enter the Settings screen.
2. Scroll to the bottom of the settings list and touch Administrative Login.
3. Enter the Administrator PIN code.
4. Scroll to the bottom of the Admin Settings list and touch MedLink Settings.
5. The configurable MedLink Settings list is displayed.

3.3 CHANGING MEDLINK LITE SETTINGS

In the MedLink Lite settings screen, the following options can be configured
• Drawer open timeout
• Enable Open All
• Enable swipe logout
• Auto logout timeout
• Change MedLink PIN
11
Fig 8
Fig 9