Table of Contents
Advertisement
4.
On the Admin Settings screen, locate the "Enable MedLink Pro" option. MedLink Pro is the more advanced control
software for the MedLink system. Disabling MedLink Pro enables MedLink Lite, and vice versa.
Fig 4
5.
If the toggle control is gray (off), MedLink Pro is disabled, meaning MedLink Lite is already enabled and you can exit
from the settings screens by touching the "gear" icon in the header again.
6.
If the toggle control is green (on), touch the control to switch it to gray and disable MedLink Pro. This will enable
MedLink Lite.
7.
When switching this control on or off you will be prompted to confirm the change. Touching OK will confirm the change
and the cart will reboot with the new setting configured.
8.
Once fully booted with MedLink Lite enabled, the system should automatically detect the presence of the MedLink
drawer system and the MedLink PIN entry screen will become available as an additional screen. You can confirm
MedLink Lite has been successfully enabled by swiping left or right repeatedly until the MedLink Lite PIN entry screen
is displayed.
10
Fig 6
Fig 7
Fig 5
Advertisement
Table of Contents
Need help?
Do you have a question about the MedLink Lite and is the answer not in the manual?