Installation Of Network Cable Waterproof Jacket - HIKVISION 2SR8141IXS Series Quick Start Manual

Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and
2.4 for details.

2.3 Installation of Network Cable Waterproof Jacket

Purpose:
If the camera is installed outdoor, you should use the waterproof accessory or tapes to
waterproof the cables. Otherwise the cables might get wet or a short circuit occurs.
①
Align
④
③
Steps:
1. Feed the network cable through ① and ③ in order.
2. Fix ② on the network cable between ① and ③.
Radar PTZ Camera·Quick Start Guide
Figure 2-11 Finish the Installation
② ④
③
⑥
Figure 2-12 Install Waterproof Jacket
9
Lock Screws
⑤
①
⑥