Advertisement
O W N E R S M A N U A L
! !
IEC POWER CORD CONNECTOR / FUSES
!
The ZTPRE uses a standard high quality IEC connector making it compatible with all after market power cords
including our own DHC-1 which is recommended. Unlike so many "hi-end" components in this price range, this is
not a 75 cent IEC jack, but instead very high quality worthy of a good power cord. Even many aftermarket
!
'audiophile' power connectors are actually just gold plated 75 cent jacks so don't be fooled.
!
!
The fuses are located on either channel of the ZTPRE and are rated at 2 amps each. Fuse specification is:
The specification shown is available from
Also you can source your own fuses so long as they are the same physical size and rating. If you use an
"audiophile" fuse, make sure it's not a standard ceramic fuse with a new wrapper or paint job as there are many fake
hi-end fuses available for 1000 times more than the actual fuse really costs. Your money would be better spent on
!
cables, or tubes.
The power switch activates both channels at the same time. As you know, the ZTPRE is a fully dual mono amplifier
which is why there are two fuses. These fuses cover both power supplies in both channels. Do not use larger than
! !
a 2 amp slow blow fuse or your warranty will be void.
Decware High Fidelity Engineering Co., East Peoria IL, USA www.decware.com
!
250V 2A Slo-Blo A 576-0313002.MXP
Physical Size is:
!
6.3 mm x 32 mm
mouser.com
or you can call DECWARE at (309) 822 5255 for replacement.
Advertisement
