Table of Contents
Advertisement
116 Seats and stowing
Attaching a roof luggage rack
& WARNING Risk of accident due to
exceeding the maximum roof load
The vehicle center of gravity and the usual
driving characteristics as well as the steering
and braking characteristics alter.
If you exceed the maximum roof load, the
driving characteristics, as well as steering
and braking, will be greatly impaired.
Never exceed the maximum roof load
#
and adjust your driving style.
You will find information on the maximum roof
load in the "Technical data" section.
* NOTE Damage to the panorama roof with
power tilt/sliding panel due to non-
approved roof luggage racks
The panorama roof with power tilt/sliding
panel may be damaged by the roof luggage
rack if you attempt to open it when using a
roof luggage rack not tested and approved
for Mercedes-Benz.
When a roof luggage rack is installed,
#
open the panorama roof with power
tilt/sliding panel only if this has been
tested and approved for Mercedes-
Benz.
The panorama roof with power tilt/sliding
panel may be raised to allow ventilation of
the vehicle interior.
Secure the roof luggage rack to the roof rail‐
#
ing.
Observe the manufacturer's installation
#
instructions.
Sockets
Using the 12 V socket
Requirements:
Only devices up to a maximum of 180 W
R
(15 A) are permissible.
Depending on the vehicle equipment, the vehicle
has the following 12 V sockets:
In the storage compartment in the front cen‐
R
ter console
In the front passenger footwell
R
In the storage compartment in the center
R
console of the rear passenger compartment
In the cargo compartment
R
Example: 12 V socket in the storage compartment
in the front center console
Fold up socket cap 1.
#
Insert the plug of the device.
#
Advertisement
Table of Contents
