Installing Clip Nuts On Netbay42 Enterprise Rack Cabinets - IBM NetBAY25 Planning Manual

Installing clip nuts on NetBAY42 Enterprise Rack cabinets

You must use clip nuts for all optional devices that do not have threaded holes. Clip
nuts install on the rack mounting flanges as shown in Figure 17.
Note: Your rack cabinet comes with a supply of clip nuts that you can use to install
Figure 17. Installing clip nuts on the rack mounting flanges
Some devices might require that you install clip nuts on the rail instead of clip nuts on
the rack mounting flanges. See the device documentation for information on when
you must install the clip nuts.
optional devices. Most devices that require them will come with clip nuts.
2 1
2 0
1 9
Chapter 4. Installing optional devices
27