Defining Rack Cabinet Physical Dimensions And Clearances - IBM NetBAY25 Planning Manual

Table of Contents

Advertisement

Defining rack cabinet physical dimensions and clearances

The NetBAY25 Rack, NetBAY42 Rack, and NetBAY42 Enterprise Rack cabinets are
Electronic Industries Association (EIA) standard rack cabinets. See Table 1 for the
dimensions and weights for the rack cabinets.
Note: The dimensions and weights shown are for the primary rack cabinets.
Table 1. Rack cabinet physical dimensions and weights.
A rack cabinet requires a minimal operational clearance on all sides to ensure proper
ventilation and access to open the front and rear doors. An extended service
clearance provides easier access to the rack cabinet so that you can install and
service optional devices. See Figure 6 and Figure 7 on page 9 for rack cabinet
service clearances. See Figure 8 on page 10 and Figure 9 on page 10 for rack
cabinet operational clearances.
Figure 6. Providing service clearance for the NetBAY25 and NetBAY42 Rack cabinets
8
IBM NetBAY Rack: Planning Guide
Expansion rack cabinets have the same physical dimensions but weigh less
because they do not have side panels.
NetBAY25
Dimensions
136 x 60 x 100 cm
(53.5 x 23.6 x 39.4 in.)
Empty weight
81 kg (177 lb)
Loaded weight
466 kg (1027 lb)
91.5 cm
(36 in.)
61 cm (24 in.)
NetBAY42
208 x 60 x 100 cm
(81.8 x 23.6 x 39.4 in.)
117 kg (258 lb)
763 kg (1678 lb)
60 cm
91.5 cm
(23.5 in.)
(36 in.)
76 cm (30 in.)
100 cm (39.4 in.)
91.5 cm (36 in.)
152 cm (60 in.)
NetBAY42 Enterprise
202 x 65 x 110 cm
(79.5 x 25.6 x 43.3 in.)
261 kg (575 lb)
928 kg (2045 lb)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netbay42Netbay42 enterprise

Table of Contents