TEFAL KTM Promix Manual page 40

• Your appliance comes with a microprocessor that controls and analyses
the operating power. If the load becomes too high, your appliance
will stop automatically. To restart your appliance, turn the selector
button (a1) to the "0" position and remove some of the ingredients.
Allow your appliance to cool down for a few minutes. You can then
select the desired speed to complete your preparation.
1 - MIXING / KNEADING / BEATING / EMULSIFYING /
WHISKING
• You can prepare up to 1.2 kg of dough or mixture using the stainless
steel bowl (b1) and its lid (b2) depending on the food.
ACCESSORIES USED:
– Stainless steel bowl (b1).
– Lid (b2)
– Kneader (c1) or mixer (c2) or balloon whisk (c3).
1.1 - ASSEMBLING THE ACCESSORIES
• Press the button (a2) to release the multi-function head (a3) and raise it
until it locks in place. Fig. 1.
• Insert the desired accessory (c1, c2 or c3) on the outlet (a6), push
and rotate it anti-clockwise a quarter turn to lock the accessory in its
housing. Fig. 2.
• Lock the stainless steel bowl (b1) by turning clockwise on the appliance
and put in the ingredients.
• Place the stainless bowl (b1) on the appliance with the handles
positioned as shown in Fig 4. Lock the bowl by turning it anti-clockwise.
Fig. 3.
Note: It is not essential to use the lid but it prevents splashing..
• Lower the multi-function head (a3) to the horizontal position: press the
button (a2) and manually lower the multi-function head (a3) until it
locks (the button (a2) returns to its initial position). Fig. 4.
• Make sure that the cover (a5) is locked correctly (turned clockwise as far
as it will go) on the high-speed outlet (a4). Fig. 5.
40