Toshiba PA3927U-1PRP dynadock U3.0 User Manual page 13

Pa3927u-1prp dynadock u3.0 user's guide
Hide thumbs Also See for PA3927U-1PRP dynadock U3.0:
Table of Contents

Advertisement

Available languages

Available languages

Component
Power light
USB light
Powered USB 3.0
ports
(USB Sleep and
Charge ports)
Headphone jack
Microphone jack
NOTE
The power or USB Hub light is visible only when the AC adaptor or at
least one USB device is connected respectively.
Introduction
Description
Glows blue when power is supplied via AC power.
Glows green when a USB device is connected to
the dynadock™.
Connection point for USB 3.0, 2.0, or 1.1 devices.
When the dynadock™ is powered ON, this port
charges select connected battery-powered USB
devices (such as MP3 players and mobile phones),
even when the dynadock™ is disconnected from
your computer or your computer is off. For more
information, please see
using Toshiba USB Sleep and Charge" on page
Note 1: Some USB devices may not support this
feature.
Note 2: Certain USB devices, such as optical disk
drives and hard disk drives, have high power
requirements.
Note 3: If your USB device came with an AC
adaptor, be sure to connect the device to a power
outlet with the AC adaptor.
A standard 3.5 mm jack for stereo audio output to
headphones/headsets/speakers.
A standard 3.5 mm jack for mono audio input from
a microphone/headset.
"Charging USB devices
13
34.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Dynadock u3.0

Table of Contents