Xircom RealPort Ethernet 10/100 User Manual page 13

Parameter
DIRECT ENABLE
EARLY TRANSMIT
FULL DUPLEX
LINE SPEED
LINK INTEGRITY
MODE
NETWORKADDRESS
TRANSMITBUFFERSIZE 7168
The network node address can be modified by specifying a value
for 'NetworkAddress' such as '0080C7112233'. If the user does
NOT specify a 'NetworkAddress' then the CE3.SYS driver uses the
network node address contained in the RealPort Ethernet 10/100
Card Information Structure.
There are parameters in the Windows registry which specify the
configuration of the RealPort Ethernet 10/100 hardware to the
CE3.SYS driver. Many of these parameters correspond directly to
the user-configurable parameters. These parameters are found in
the registry at the following location:
HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\CLASS\NET\000X
Windows 95 and 98 Installation
Default Valid Values Registry Value
OFF OFF
ON
ON OFF
ON
OFF OFF
ON
AUTO AUTO DETECT
10MBPS
100MBPS
ON OFF
ON
I/O I/O
MEMORY MAPPED
SEE NOTE BELOW
1024-29696
2-5
0
1
0
1
0
1
0
1
2
0
1
0
1
1024-29696