Xircom RealPort Ethernet 10/100 User Manual page 12

2-4
RealPort Ethernet 10/100 User's Guide
3 In the configuration window verify that the correct Network
Protocols are installed.
• To install the native Microsoft Network Protocol, double-
click Protocols. Click Add. Under the Manufacturers list,
select Microsoft. Double-click NetBEUI.
• To install the IPX/SPX compatible Protocol, double-click
Protocols. Click Add. Under the Manufacturers list, select
Microsoft. Double-click IPX/SPX compatible Protocol.
If necessary, consult your network administrator for
additional information regarding client and protocol
configuration details.
Windows 95 and 98 Driver Parameters
CE3.SYS (NDIS3) Settings
CE3.SYS is an NDIS3 driver. It conforms to the Microsoft Network
Driver Interface Specification (NDIS). CE3.SYS is installed by
default. For NDIS4 instructions, see the README file on the
Xircom Windows 95, 98, and NT Installation Disk.
The files necessary for using CE3.SYS with Windows 95 and 98
include:
NETCE3.INF
CE3.SYS
There are user-configurable parameters for the CE3.SYS driver that
can be modified using the Network Control Panel built into
Windows. This applet queries the user for parameter selections
and then sets the corresponding parameters in the registry. The
user-configurable parameters are as follows:
Xircom install file for Windows 95 and 98
Xircom NDIS3 driver for Windows 95 and 98