Toshiba Tecra M7 Series User Manual page 84

84
Getting Started
Turning off the computer
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
4 Select Standby for the options you want.
5 Click Apply.
6 Click OK.
NOTE
Once the computer is configured, you can place it into
Standby mode by either sliding the power button to the right
or closing the display panel, depending on the Standby
options set.
Starting again from Standby mode
To start up the computer from Standby mode, slide the power
button to the right until the on/off light glows green. The
computer returns to the screen(s) you were using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
When I press the power button
Set this option to Standby if you want the computer
to go into Standby mode when you sliding the power
button to the right.
When I close the lid
Set this option to Standby if you want the computer
to go into Standby mode when you close the display
panel.
For more information about the Power Saver utility, see
"Toshiba Power Saver" on page 179.