Fingerprint Logon; Power-On Security - Toshiba Tecra M7 Series User Manual

Fingerprint Logon

The fingerprint utility enables logon to your computer using
fingerprints. During user enrollment, fingerprint samples are
saved and associated with the user's Windows
When the user attempts to log on again, the user's fingerprint
is read and compared with the user's enrolled fingerprints; if
the fingerprint is recognized, user logon is completed.
The Fast User Switching feature of Windows
supported. If user A is logged on and the fingerprint utility
verifies the fingerprint of user B (who is already enrolled),
the utility recognizes the fingerprint and switches the users.
If your system supports power-on security, existing
fingerprint samples can be used also for power-on
authentication.

Power-on Security

The power-on security feature prevents unauthorized access
to your computer when it is turned off by requiring the user to
pass fingerprint authentication. If fingerprint authentication
fails, the user will not be able to start the computer.
When power-on security is enabled, the system asks you to
authenticate your fingerprint. You have 40 seconds to swipe
your fingerprint.
If the authentication fails, the system tries again up to two
more times. If authentication fails after the third attempt, the
system shuts down.
Enabling Power-on Security
Options for power-on security are displayed only if your
computer supports this feature. In most configurations,
power-on security is enabled automatically after the first user
fingerprints are enrolled.
Fingerprint Authentication Utility
Toshiba Utilities
®
user account.
®
XP is also
201