Toshiba Tecra M7 Series User Manual page 71

2 While holding down
setting you want takes effect. Briefly pause each time you
press the
F5
This hot key cycles through the settings in the following
order:
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
TV and built-in display
TV only
Primary and CRT
Dual Mode display
Swap image display
3 Release the
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel, Appearance and Themes, and then clicking
Display. Choose the Settings tab, click the Advanced button,
select Display Device, select the applicable Monitor type, and
then click Apply or OK.
Using external display devices
, press
Fn
key to allow time for the display to change.
key.
Fn
Getting Started
repeatedly until the
F5
71