66
Getting Started
Using external display devices
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
1
Press
2
While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖
❖
❖
❖
❖
❖
❖
(Sample Image) Display options window
3
Release the
Fn
and
F5
simultaneously.
Built-in display panel only
Built-in display panel and external monitor simultaneously
External monitor only
Built-in display panel and TV simultaneously
TV only
Built-in display panel and external monitor extended
Built-in display panel and TV extended
key.
Fn
+
Fn
, press
repeatedly until the setting
Fn
F5
):
F5
F5