Using Hibernation Mode - Toshiba M4 User Manual

5 Select Shut down for the option you want.
6 Click Apply.
7 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again after Turn Off or Shut down
To start the computer up again, slide and release the power
switch; the on/off light changes to green.

Using hibernation mode

Hibernation is a default setting. If it should become disabled,
you can enable it as follows:
1 Right-click the mouse on the Toshiba Power Saver icon
located in the System Task Tray.
2 Click Hibernate.
3 Click Enable.
Going into hibernation mode
If you are not connected to a Windows
(domain server), power off the computer using the
Hibernation command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
2 Hold down the shift key and click Hibernate
("Hibernate" only appears while the Shift key is held
down).
When I press the power button
Set this option to Shut down if you want the
computer to turn off when you slide the power
switch.
Learning the Basics
Powering down the computer
®
network server
113