Chapter 7 : Battery Module Installation & Replacement - Delta RT Series User Manual

Chapter 7 : Battery Module Installation & Replacement
NOTE:
1. The lithium-ion battery module is optional. Please refer to Figure 7-1
for its appearance.
2. For model RT-20K-LIB, two lithium-ion battery modules are required.
3. For model RT-10K-LIB, it can be configured with one lithium-ion
battery module per customer's future demand.
Follow the instructions below and the steps ❶ ~ ❹ shown in Figure 7-2 to
install or replace the lithium-ion battery module in the Delta lithium-ion battery
pack.
Step ❶ : Unscrew the screws to remove the battery pack's front panel.
Step ❷ : Use a Phillips screwdriver to remove the protection cover's screws.
Step ❸ : Remove the protection cover.
Step ❹ : For installation, please insert a new battery module. For replacement,
extract the used battery module from the left or the right compartment
and replace it with a new one.
(Figure 7-1: Lithium-ion Battery Module)
21