Table of Contents
Advertisement
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
NOTE
The following screen appears when you turn on the power:
If "Start Windows
If one of the Safe Mode options is highlighted, it is best to press
Enter
which time Windows
When Safe Mode is suggested, this could be a sign that you may
need to scan your hard drive for errors or defragment the drive. If so,
consult Windows
2
Pull the latches away from the memory module.
The memory module pops up slightly.
NOTE
If your system has the memory modules stacked on top of one
another, you must remove the top module first before removing/
installing the bottom module.
Adding memory (optional)
®
Normally" is highlighted, then press
to go into Safe Mode, then shut down and restart the system, at
®
should boot back up normally.
®
Help and Support.
Getting Started
55
.
Enter
Advertisement
Table of Contents
