Connecting The Display Device - Toshiba 8200 User Manual

58
Connecting Other External Devices
Using external display devices
Before connecting a television, video projector, monitor or other
display device, configure your computer for the type of device
you're connecting. To do this, refer to the documentation for your
operating system or devices.

Connecting the display device

If you're connecting a television or other video display device to
the computer's composite video port, first refer to
cables" below for guidelines on choosing a video cable, then refer
to "Connecting to the composite video port" on page
If you're connecting an SVGA monitor, skip to
external monitor" on page
Selecting video cables
To connect a device to the composite video port, you need to
purchase a composite video cable. For the best video quality,
always use a properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy picture,
poor color, ghosting, video noise, or loss of video.
Connecting to the composite video port
To connect the device:
1 Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
59.
"Selecting video
58.
"Connecting an