Table of Contents
Advertisement
108
Learning the Basics
Power down options
3
Click OK to clear the dialog box.
The Power Management Properties dialog box appears.
4
Click the Hibernate tab.
5
Click the Enable hibernate support check box, then click
OK.
TECHNICAL NOTE: Toshiba recommends that you always
have the Hibernate option enabled. Hibernate is the function
that causes your system to save anything you have in short-
term memory to the hard disk drive should your battery fail.
If Hibernate is not enabled and your battery dies, you will
lose data.
Other Hibernation mode settings
When Hibernation mode is enabled, you can specify it to be
automatically activated when you close the lid or press the power
switch. To set automatic Hibernation mode:
1
Open the Start menu, point to Settings, then click Control
Panel.
2
In the Control Panel window, double-click the Power Saver
icon.
3
In the Power Save Mode tab, click the Details button, then
select the System Power Mode tab.
The power mode settings window appears.
Advertisement
Table of Contents
Troubleshooting
